HP Mini 110-1056TU Service Guide - Page 65
Hard drive, Solid-state drive, Remove the 4 Phillips SP3.0×4.0 screws
View all HP Mini 110-1056TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
2. Use the Mylar tab to slide the assembly to the left (3) to disconnect it, and remove the assembly (4). Continue with one of the following sections for hard drive or solid-state drive replacement. Hard drive 1. Remove the 4 Phillips SP3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive. 2. Using the Mylar tab, lift the bracket (2) away from the hard drive. Reverse this procedure to install a hard drive. Solid-state drive To remove the solid-state drive: 1. Remove the 4 Phillips SP2.0×3.0 screws (1) that secure the solid-state drive bracket to the solid- state drive. Component replacement procedures 55
2.
Use the Mylar tab to slide the assembly to the left
(3)
to disconnect it, and remove the
assembly
(4)
.
Continue with one of the following sections for hard drive or solid-state drive replacement.
Hard drive
1.
Remove the 4 Phillips SP3.0×4.0 screws
(1)
that secure the hard drive bracket to the hard drive.
2.
Using the Mylar tab, lift the bracket
(2)
away from the hard drive.
Reverse this procedure to install a hard drive.
Solid-state drive
To remove the solid-state drive:
1.
Remove the 4 Phillips SP2.0×3.0 screws
(1)
that secure the solid-state drive bracket to the solid-
state drive.
Component replacement procedures
55