HP Mini 110c-1000 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 -
HP Mini 110c-1000 - PC Manual
View all HP Mini 110c-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Mini 110c-1000 manual content summary:
- HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 1
HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 Maintenance and Service Guide - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 2
and other countries. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 3
the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 4
iv Safety warning notice - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 5
...25 4 Removal and replacement procedures Preliminary replacement requirements 29 Tools required ...29 Service considerations ...29 Plastic parts ...29 Cables and connectors 29 Drive handling 30 Grounding guidelines ...31 Electrostatic discharge damage 31 Packaging and transporting guidelines - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 6
Equipment guidelines 33 Component replacement procedures 34 Service tag ...34 Device feet ...35 Battery ...36 SIM ...37 Memory module ...38 Keyboard ...40 RTC battery ...44 Mass storage devices ...45 Hard drive ...46 Solid-state drive 46 Top cover ...48 WLAN module ...51 WWAN module ...53 USB/ - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 7
97 Using System Restore 98 Using HP Mi Restore Image Creator 98 Restoring using a Windows computer 98 Restoring using a Linux computer 99 Windows Vista backup and recovery 101 Backing up your information 101 Performing a recovery ...102 Using the Windows recovery tools 103 Using f11 ...104 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 8
10 Power cord set requirements Requirements for all countries and regions 112 Requirements for specific countries and regions 113 11 Recycling Battery ...114 Display ...114 Index ...120 viii - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 9
1 Product description Category Product Name Processor Chipset Graphics Panels Memory Description HP Mini 1101 HP Mini 110 NoteBook PC HP Mini 1101 NoteBook PC √ HP Mini 110 √ Compaq Mini 110 Intel® Atom™ N280 1.66-GHz √ √ processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 10
Category Mass storage devices Hard drive Optical drive Diskette drive Audio/Visual Modem Ethernet Description ● 512-MB total system memory (512 × 1) HP Mini 1101 HP Mini 110 NoteBook PC √ NOTE: Supported by computers with Windows® XP Home Edition Service Pack 3 only. ● 1024-MB total system - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 11
adapter (non-Smart) with √ √ localized cable plug support AC adapter connector on cable √ √ 3-cell lithium-polymer (Li-Pol) battery √ √ (2.55-Ah, 28-Wh), 3-hour target life 6-cell lithium-polymer (Li-Pol) battery √ √ (2.55-Ah, 55-Wh), 6-hour target life Compaq Mini 110 √ √ √ √ √ √ 3 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 12
(ULCPC) edition Windows Vista® Business 32 (with XP √ Pro image) HP Mobile Mi √ Serviceability End-user replaceable parts: AC adapter √ √ Battery (system) √ √ Hard drive √ √ Keyboard √ √ Memory module √ √ Solid-state drive √ √ Compaq Mini 110 √ √ 4 Chapter 1 Product - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 13
2 External component identification Components included with the device may vary by region and model. The illustrations in this chapter identify the standard features on most device models. Top components TouchPad Component (1) Left TouchPad button (2) TouchPad (3) TouchPad scroll zone (4) - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 14
Light Component Caps lock light Description On: Caps lock is on. 6 Chapter 2 External component identification - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 15
Keys NOTE: Refer to the illustration that most closely matches your computer. Component (1) (2) (3) (4) Function keys fn key Windows® logo key Windows applications key Description Execute frequently used system functions when pressed in combination with the fn key. Executes frequently used system - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 16
Component (1) (2) (3) (4) Function keys fn key Home key Program Switcher key Description Execute frequently used system functions when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key. Returns to the Home Screen. - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 17
off the device. Blinking: The hard drive or flash drive is being accessed. ● On: A battery is charging. ● Blinking: A battery that is the available only power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. ● Off - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 18
Component (5) Wireless light (6) Wireless switch Description ● Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, is on. ● Amber: All wireless devices are off. Turns the wireless feature on or off, but does not establish a wireless connection. NOTE: A - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 19
● Memory Stick (MS) ● Memory Stick Pro (MSP) ● MultiMediaCard (MMC) ● Secure Digital (SD) Memory Card ● xD-Picture Card (3) External monitor port Connects an optional external display, such as a monitor or projector, to the device. (4) RJ-45 (network) jack Connects a network cable. Right - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 20
Left-side components Component (1) Security cable slot (2) Power connector (3) AC adapter light (4) Vent (5) USB port (6) Audio-out (headphone) jack/Audio-in (microphone) jack Description Attaches an optional security cable to the device. NOTE: The security cable is designed to act as - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 21
. NOTE: The display switch is not visible from the outside of the device. Captures still photographs and videos. NOTE: To capture videos, you need to install additional webcam software. On: The webcam is in use. Records sound. Display components 13 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 22
Bottom components Component (1) Battery bay (2) Battery release latches (2) (3) Vent (4) Memory module compartment Description Holds the battery. Release the battery from the battery bay. Enables airflow to cool internal components. NOTE: The device fan starts up automatically to cool - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 23
(WWANs). (2) WLAN antennas (2)* NOTE: This option is not available on computers with Mobile Mi installed. Send and receive wireless signals to communicate with wireless local area networks (WLANs). *The antennas are not visible from the outside of the device. For optimal transmission, keep - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 24
This number provides specific information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. (4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and support for the device - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 25
number Display assembly (includes 1 webcam, 1 microphone, 1 speaker box, and 2 WLAN antenna transceivers/cables; WWAN is optional) See Display assembly components on page 21 for a comprehensive list of display assembly spare parts. For use with HP models - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 26
, standard-definition, AntiGlare Display Assembly (includes WWAN) ● 10.1-inch, standard-definition, AntiGlare Display Assembly Keyboard For use only on models with Windows operating system installed ● For use only in Brazil ● For use only in the Czech Republic ● For use only in Europe ● For use only - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 27
of hard drive spare parts. Solid-state drive See Mass storage devices on page 23 for a comprehensive list of solid-state drive spare parts. Heat sink assembly (includes replacement thermal material) 537619-001 Fan 537613-001 USB/audio board (includes cable) 537614-001 Power/battery pass - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 28
) 512-MB (for use in HP Mini 110 and Compaq Mini 110 models only) 537663-001 1024-MB 537664-001 2048-MB (for use in HP Mini 1101 NoteBook PC, and HP Mini 110 with Mobile Mi installed 537665-001 only) Base enclosure (includes 4 rubber feet) 537611-001 Battery 6-cell lithium-polymer (Li-Pol - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 29
537617-001 For use with HP Mini 1101 NoteBook PC, and HP Mini 110 only For use with Compaq Mini 110 only (3) Display Hinge Kit 537650-001 537644-001 537658-001 (Includes left and right display panel hinges) (4) Speaker assembly (includes left and right cables) (5) Display panel 537621-001 10 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 30
Microphone assembly (8) WWAN antennas (not available on computers with Mobile Mi installed.) (9) Display enclosure (includes logo) For use with the HP Mini 1101 Notebook PC, and HP Mini 110 For use with the Compaq Mini 110 Display Screw Kit (not illustrated) Spare part number 537655-001 537651-001 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 31
Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Item Description (1) Hard drive (select models only) 250-GB, 5400-RPM 160-GB, 5400-RPM Hard Drive Hardware Kit (not illustrated) (2) Solid-state drive 64-GB 32-GB 16-GB 8-GB - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 32
Miscellaneous parts Description 30-W UMA AC adapter Bluetooth® adapter Power cords For use in Argentina For use in Australia For use in Brazil For use in China For use in Denmark For use - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 33
Sequential part number listing Spare part number Description 483377-002 HP un2400 Mobile Broadband Module (select models only) 483377-003 HP un2400 Mobile Broadband Module for use with Verizon Wireless only (select models only) 490371-001 Power cord for use in North America 490371-011 Power - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 34
use only in Saudi Arabia on models with Windows operating system installed 535689-201 Keyboard for use only in Brazil on models with Windows operating system installed 535689-211 Keyboard for use only in Hungary on models with Windows operating system installed 535689-221 Keyboard for use only in - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 35
use with HP Mini 1101 NoteBook PC, and HP Mini 110 only Display enclosure (includes logo) for use with the HP Mini 1101 Notebook PC, and HP Mini 110 WWAN antennas 10.1-inch standard-definition AntiGlare display panel Display Cable Kit (includes microphone assembly display cable, webcam cable, and - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 36
, 533-MHz, DDR2 for use in HP Mini 110 and Compaq Mini 110 models only) 1024-MB memory module (PC2-5300, 533-MHz, DDR2 for use in HP Mini 110 and Compaq Mini 110 models only) 2048-MB memory module (PC2-5300, 533-MHz, DDR2 for use in HP Mini 110 and Compaq Mini 110 models only) Display Screw Kit (not - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 37
only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the device, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the device. Cables must be handled with extreme care to - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 38
of static electricity. While handling a drive, avoid touching the connector. Handle drives on surfaces covered with at least one inch of shock-proof foam. Avoid dropping drives from any height onto any surface. After removing a hard drive, an optical drive, or a diskette drive, place it in a static - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 39
the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to internal layers, reducing its life expectancy. CAUTION: To prevent damage to the device when you are removing or installing internal components, observe - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 40
and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures and Styrofoam. ● Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations. ● - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 41
strap snugly against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a wrist strap. ● When standing, use foot straps Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material- - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 42
This number provides specific information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. (4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and support for the device - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 43
Device feet The device feet are adhesive-backed rubber pads, tethered to the base enclosure. Description Rubber Kit Spare part number 537618-001 Component replacement procedures 35 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 44
from the device. Remove the battery: 1. Turn the device upside-down on a flat surface, with the battery bay toward you. 2. Slide the battery release latches (1) to release the battery. 3. Remove the battery (2). Reverse this procedure to install a battery. 36 Chapter 4 Removal and replacement - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 45
from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). Remove the SIM: 1. Press in on the SIM (1). (The module is partially ejected from the SIM slot.) 2. Remove the SIM (2) from - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 46
HP Mini 110 and Compaq Mini 110 only) 1024-MB 2048-MB (for use in HP Mini 1101 NoteBook PC, and HP Mini 110 with Mobile Mi installed only) Spare part number 537663-001 537664-001 537665-001 Before removing the memory . 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 47
4. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Component replacement procedures 39 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 48
Keyboard Description For use only on models with Windows operating system installed ● For use only in Brazil ● For use only in United Kingdom ● For use only in the United States For use only on models with Mobile Mi installed ● For use only in Brazil ● For use only in French Canada ● For use only in - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 49
power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. Remove the keyboard: 1. Remove the 3 Phillips SP2 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 50
keyboard until the keyboard releases completely. 6. Slide the keyboard back until its top edge rests on the display assembly (2). 7. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached. 42 Chapter 4 Removal and replacement procedures - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 51
8. Disconnect the cable (2), and then remove the keyboard. 9. Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 43 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 52
40) Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the system board. NOTE: The RTC battery is attached to the system board with double-sided tape. Reverse this procedure to install the RTC battery. 44 Chapter 4 Removal and - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 53
hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Description Hard drive (select models only) 250-GB, 5400-RPM 160-GB, 5400-RPM Hard Drive Hardware Kit Solid-state drive 64-GB 32-GB 16-GB 8-GB Solid-state Drive 4. Remove the battery (see Battery on page 36 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 54
for hard drive or solid-state drive replacement. Hard drive 1. Remove the 4 Phillips SP3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive. 2. Using the Mylar tab, lift the bracket (2) away from the hard drive. Reverse this procedure to install a hard drive. Solid-state drive To - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 55
2. Lift the solid-state drive (2) to remove it. Reverse this procedure to install a solid-state drive. Component replacement procedures 47 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 56
. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the memory module (see Memory module on page 38 7. Remove the keyboard (see Keyboard on page 40). 8. Remove the hard drive or solid-state drive assembly (see Mass - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 57
top cover (1) and swing it up. Then slide the top cover back slightly to rest against the display assembly (2) at an angle. 8. Release the ZIF connector (1) to which the TouchPad button board cable is connected. Component replacement procedures 49 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 58
9. Disconnect the TouchPad button board cable (2) from the system board, and then remove the top cover. Reverse this procedure to install the top cover. 50 Chapter 4 Removal and replacement procedures - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 59
and then contact technical support through Help and Support. Before removing the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 60
secure the WLAN module to the system board. (The edge of the module opposite the slot rises away from the device.) 2. Disconnect the wireless antenna cables (2) from the terminals on the WLAN module. 3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. Reverse this - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 61
then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. Remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45) c. Top cover (see - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 62
3. Remove the WWAN module (3) by pulling the module away from the slot at an angle. Reverse this procedure to install the WWAN module. 54 Chapter 4 Removal and replacement procedures - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 63
(see Keyboard on page 40). b. Hard drive or solid-state drive (see Mass storage devices on page 45). c. Top cover (see Top cover on page 48). Remove the USB board: 1. Release the ZIF connector (1) to which the USB/audio board cable is connected, and disconnect the cable (2). 2. Release the USB/audio - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 64
components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45) c. Top cover (see Top cover on page 48) Remove the power/battery pass-through board: 1. Disconnect the power cable (1). 2. Remove the 2 Phillips BP2.5×5.0 screws (2) that secure - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 65
the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 66
3. Remove the fan (3). Reverse this procedure to install the fan. 58 Chapter 4 Removal and replacement procedures - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 67
the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 68
used on the Northbridge chip (2). Replacement thermal material is included with all heat sink assembly and system board spare part kits. Reverse this procedure to install the heat sink assembly. 60 Chapter 4 Removal and replacement procedures - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 69
the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 70
the system board: (2) Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only) 3. Remove the 2 Phillips PM1.5×2.0 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board. 4. - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 71
lift it up. 7. Pull the system board (2) out to the left at an angle to remove it. 8. Remove the system board. Reverse the procedure to install the system board. Component replacement procedures 63 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 72
microphone assembly display cable, webcam cable, 537657-001 and WLAN antennas) Display panel cable Microphone assembly WLAN antennas WWAN antennas Display enclosure (includes logo) For use with the HP Mini 1101 Notebook PC, and HP Mini 110 For use with the Compaq Mini 110 Display Screw Kit - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 73
the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 74
PM2.5×5.0 screws (1) that secure the display assembly to the device. NOTE: One screw on the left hinge (2) also secures the display panel cable ground strap. 4. Remove the display assembly. 5. If it is necessary to replace the display bezel, perform the following steps: a. Remove the display - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 75
screws that secure the display panel to the display enclosure. b. Lift the display panel up from the display enclosure (1). c. Disconnect the webcam cable (2) from the system board (2) d. Remove the display panel (3) from the display enclosure. 7. If it is necessary to replace the speaker assembly - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 76
.0×3.0 screws (1) that secure each hinge to the display enclosure. b. Remove the hinges (2). 9. If it is necessary to replace the display panel cable, perform the following steps: a. Peel back the Mylar protection on the back of the display panel (1). 68 Chapter 4 Removal and replacement procedures - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 77
(2). 10. If it is necessary to replace the webcam module, perform the following steps: a. Disconnect the webcam cable (1) from the webcam. b. Remove the webcam (2). 11. If it is necessary to replace the microphone receiver, perform the following steps: a. Release the microphone receiver from the - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 78
If it is necessary to replace the wireless antenna transceivers and cables, detach the cables from the adhesive (1) that secures them to the display enclosure, and then remove the cables (2). Reverse this procedure to reassemble and install the display assembly. 70 Chapter 4 Removal and replacement - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 79
or restarting the device, and then pressing f10 while the "F10 = BIOS Setup Options" message is displayed in the lower-left corner of the Utility Because the Setup Utility is not operating system-based, it does not support the TouchPad. Navigation and selection are by keystroke. ● To choose a menu - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 80
Utility is already running, begin at step 2. 1. Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the "F10 = BIOS Setup Options" message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Exit > Load Setup Defaults, and then - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 81
. ● View specification information about the processor, memory size, and system BIOS. Security menu Network Adapter. ● Boot Order―Set the boot order for: ◦ Internal hard drive (select models only) ◦ USB Floppy ◦ USB CD/DVD ROM Drive ◦ USB flash drive ◦ USB Hard drive ◦ USB Card Reader ◦ Network - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 82
Diagnostics menu Select Hard Disk Self Test (select models only) Memory Test To do this Run a comprehensive self-test on the hard drive. Run a diagnostic test on the system memory. 74 Chapter 5 Setup Utility - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 83
6 Specifications Device specifications Metric Dimensions Depth 16.67 cm Width 26.17 cm Height 2.52 cm Weight 10.1-in. LCD, equipped with a 3-cell battery, hard drive, 1-GB 1.11 kg memory, WLAN module, and 2 wireless antennas 10.1-in. LCD, equipped with a 3-cell battery,solid-state drive, - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 84
10.1-inch, AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration 1024 × 576 RGB vertical stripe Edge lit 80 × 25 3.2 W +/-45° horizontal, +15/-35° vertical (typical) 76 Chapter 6 Specifications - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 85
Operating temperature * 1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. Hard drive specifications 77 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 86
drive specifications Performance Transfer modes supported Sustained read Sustained write Characteristics Interface MLC NAND flash capacity Electrical specifications DC supply voltage Standby current Active current Environmental specifications ZIF connector 5.5 g 7.0 g 54 × 32 × 2.6 mm 54 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 87
System DMA specifications Hardware DMA DMA0 DMA1 * DMA2 * DMA3 DMA4 System function Not applicable Not applicable Not applicable Not applicable Direct memory access controller System DMA specifications 79 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 88
System interrupt specifications Hardware IRQ IRQ0 IRQ1 IRQ8 IRQ9 * IRQ12 IRQ13 IRQ14 IRQ15 2 Intel 82801G (ICH7 Family) PCI Express Root Port-27D0 Intel 82801G (ICH7 Family) USB Universal Host Controller-27CB Microsoft UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 89
System I/O address specifications I/O address (hex) 000 - 00F 000 - CF7 010 - 01F 020 - 021 022 - 03F 040 - 043 044 - 05F 060 - 060 061 Motherboard resources DMA controller Motherboard resources Numeric data processor Primary IDE channel ISAPNP Read Data Port System I/O address specifications 81 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 90
FFA0 - FFAF System function (shipping configuration) ISAPNP Read Data Port Mobile Intel® 945 Express Chipset Family Mobile Intel 945 Express Chipset resources Motherboard resources ISAPNP Read Data Port PCI bus Intel 82801G (ICH7 Root Port-27D2 Intel 82801G (ICH7 Family) Ultra ATA Storage - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 91
® UAA Bus Driver for High Definition Port-27D0 Broadcom 802.11b/g WLAN Intel 82801G (ICH7 Family) PCI Express Root Port-27D2 Motherboard resources System board Motherboard resources Motherboard resources Motherboard resources System board Motherboard resources System memory map specifications - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 92
7 Screw listing This section provides specification and reference information for the screws and screw locks used in the device. All screws listed in this section are available in the Screw Kit, - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 93
Where used: Two screws that secure the power and wireless switch actuators to the base enclosure Phillips PM1.5×1.0 screw 85 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 94
Phillips PM2.0×3.0 screw Color Black Quantity 20 Length 3.0 mm Thread 2.0 mm Head diameter 4.0 mm Where used: 3 screws that secure the keyboard to the device Where used: Four screws that secure the solid-state drive to the bracket 86 Chapter 7 Screw listing - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 95
Where used: Seven screws that secure the display panel to the display enclosure Where used: Three screws that secure the speaker assembly to the display enclosure Where used: Four screws that secure the hinges to the display panel Phillips PM2.0×3.0 screw 87 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 96
Phillips PM2.0×3.0 captive screw Color Black Quantity 2 Length 3.0 mm Thread 2.0 mm Head diameter 4.0 mm 88 Chapter 7 Screw listing - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 97
Phillips PM2.0×4.0 screw Color Silver Quantity 4 Length 4.0 mm Thread 2.0 mm Head diameter 4.0 mm Where used: Two screws that secure the WLAN module to the system board Where used: Two screws that secure the WWAN to the system board Phillips PM2.0×4.0 screw 89 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 98
Phillips PM2.0×5.0 screw Color Silver Quantity 3 Length 5.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: Two screws that secure the hard drive or solid-state drive to the system board Where used: One screw that secures the top cover to the base enclosure 90 Chapter 7 Screw listing - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 99
Phillips PM2.5×5.0 screw Color Silver Quantity 15 Length 5.0 mm Thread 2.5 mm Head diameter 4.5 mm Where used: Two screws that secure the power/battery passthrough board to the system board Where used: Four screws that secure the display assembly and top cover to the device Phillips PM2.5×5.0 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 100
Where used: Two screws that secure the fan to the system board Where used: Three screws that secure the system board to the base enclosure Where used: Four screws that secure the display assembly to the base enclosure 92 Chapter 7 Screw listing - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 101
Phillips PM2.5×7.0 screw Color Black Quantity 12 Length 7.0 mm Thread 2.5 mm Head diameter 4.0 mm Where used: Four screws that secure the top cover to the base enclosure Where used: Eight screws that secure the top cover to the base enclosure Phillips PM2.5×7.0 screw 93 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 102
Phillips PM2.5×10.0 captive screw Color Black Quantity 1 Length 10.0 mm Thread 2.5 mm Head diameter 4.0 mm Where used: One captive screw, with a C-clip, that secures the hard drive or solid-state drive bracket to the system board 94 Chapter 7 Screw listing - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 103
Phillips PM3.0×40.0 screw Color Black Quantity 4 Length 4.0 mm Thread 3.0 mm Head diameter 4.0 mm Where used: Four screws that secure the hard drive bracket to the hard drive Phillips PM3.0×40.0 screw 95 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 104
8 Backup and recovery Select the section in this chapter that applies to the operating system installed on your computer. 96 Chapter 8 Backup and recovery - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 105
add or modify hardware or software Restoring your information In case of system failure or instability, you can restore the operating system and programs installed at the factory. CAUTION: The restore process reformats hard drive, completely erasing all information. All the files you have created - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 106
and restore the system. Follow the specific operating system instructions in this section to restore your system. CAUTION: The restore process reformats and completely erases the hard drive on the Mini. All the files you have created and any software installed on the device are permanently removed - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 107
7. Click Download only. 8. Save ImageCreator.msi to the Windows computer. 9. Double-click ImageCreator.msi and follow the on-screen instructions to install HP Mi Restore Image Creator. 10. Insert the USB flash drive into a USB port on the Windows computer. CAUTION: The restore process reformats and - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 108
not installed with the factory image. 22. Restore your personal files. NOTE: After this process is complete, you can uninstall the HP Mi Restore Image Creator utility from the Linux computer and delete the downloaded recovery image from the USB flash drive. (The image must be deleted manually.) 100 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 109
can back up your information to an optional external hard drive, a network drive, or discs. Note the following when backing up drive installed in your computer. NOTE: DVDs and DVDs with double-layer (DL) support store more information than CDs, so using them for backup reduces the number of recovery - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 110
can also use Windows Startup Repair to fix problems that might prevent Windows from starting correctly. ● f11 recovery tools: You can use the f11 recovery tools to recover your original hard drive image. The image includes the Windows operating system and software programs installed at the factory - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 111
changing Windows settings. Refer to Help and Support for more information. To recover your information using Startup Repair, follow these steps: CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 112
reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. When reformatting is complete, the recovery process helps you restore the operating system, as well as drivers, software, and utilities. To initiate recovery using a Windows Vista - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 113
recovery Use the instructions in this section if Windows XP is installed on your computer. To protect your information, use the Windows® Backup utility (select models only) to back up files and folders or create recovery points. In case an optional external hard drive or to a network drive. Note the - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 114
completely erases the hard drive. All files you have created and any software installed on the computer are permanently removed. The recovery process reinstalls the original operating system, software, and drivers. Software, drivers, and updates not installed by HP must be manually reinstalled. To - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 115
9 Connector pin assignments Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-in (microphone) 107 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 116
Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground 108 Chapter 9 Connector pin assignments - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 117
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock External monitor 109 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 118
RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused 110 Chapter 9 Connector pin assignments - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 119
Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground Universal Serial Bus 111 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 120
power system of each country or region. ● The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13 connector for mating with the appliance inlet on the back of the device. 112 Chapter 10 Power cord set requirements - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 121
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA for evaluation in the country or region where it will be used. Requirements for specific countries and regions 113 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 122
life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life disassembly instructions. Specific details, - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 123
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 124
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 125
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. Display 117 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 126
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 127
18. Remove the backlight from the backlight frame. 19. Disconnect the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 128
12 right-side 11 TouchPad 5 connectors service considerations 29 D device feet locations 35 spare part number 35 device specifications 75 Diagnostics menu 74 Digital Media Slot, identifying 11 discs Driver Recovery 106 Operating System 106 diskette drive precautions 30 product description 2 display - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 129
part number 18, 40 keys fn 7, 8 function 7, 8 Home 8 Program Switcher 8 Windows applications 7 Windows logo 7 L language support 73 latches, battery release 14 left TouchPad button, identifying 5 lights battery 9 caps lock 6 drive 9 power 9 webcam 13 wireless 10 M Main menu 73 mass storage device - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 130
default settings 72 restoring the hard drive 104 right TouchPad button, identifying 5 RJ-45 (network) jack, identifying 11 RJ-45 jack pin assignments 110 RTC battery removal 44 spare part number 20, 44 Rubber Kit, spare part number 24 screw listing 84 security cable slot, identifying 12 Security - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 131
WWAN module removal 53 spare part number 53 Index 123 - HP Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 - - Page 132
HP Mini 1101 Notebook PC, HP Mini 110, and
Compaq Mini 110
Maintenance and Service Guide