HP Mini 1120TU HP Mini 1000 Netbook - Maintenance and Service Guide - Page 53

RTC battery, Top cover see

Get HP Mini 1120TU PDF manuals and user guides View all HP Mini 1120TU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

RTC battery Description RTC battery Spare part number 507707-001 Before removing the real-time clock (RTC) battery, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 32). 5. Remove the following components: a. Keyboard (see Keyboard on page 35) b. Hard drive or solid-state drive (see Mass storage devices on page 37) c. Top cover (see Top cover on page 40) Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the system board, and then remove the RTC battery. NOTE: The RTC battery is attached to the system board with double-sided tape. Reverse this procedure to install the RTC battery. Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
RTC battery
Description
Spare part number
RTC battery
507707-001
Before removing the real-time clock (RTC) battery, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
Battery
on page
32
).
5.
Remove the following components:
a.
Keyboard (see
Keyboard
on page
35
)
b.
Hard drive or solid-state drive (see
Mass storage devices
on page
37
)
c.
Top cover (see
Top cover
on page
40
)
Remove the RTC battery:
1.
Disconnect the RTC battery cable
(1)
from the system board.
2.
Detach the RTC battery
(2)
from the system board, and then remove the RTC battery.
NOTE:
The RTC battery is attached to the system board with double-sided tape.
Reverse this procedure to install the RTC battery.
Component replacement procedures
45