HP Mini 311c-1070EF HP Pavilion dm1 HP Mini 311 Compaq Mini 311 - Maintenance - Page 60
Remove the 4 Phillips PM3.0×4.0 screws, that secure the hard drive bracket to the hard drive.
View all HP Mini 311c-1070EF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Removal and replacement procedures 5. If it is necessary to replace the hard drive bracket or connector, follow these steps: a. Disconnect the hard drive connector 1 from the hard drive. b. Remove the 4 isolators 2 from the 4 corners of the hard drive bracket. c. Remove the 4 Phillips PM3.0×4.0 screws 3 that secure the hard drive bracket to the hard drive. d. Lift the bracket 4 straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. 4-20 Maintenance and Service Guide
4–20
Maintenance and Service Guide
Removal and replacement procedures
5. If it is necessary to replace the hard drive bracket or connector, follow these steps:
a.
Disconnect the hard drive connector
1
from the hard drive.
b.
Remove the 4 isolators
2
from the 4 corners of the hard drive bracket.
c.
Remove the 4 Phillips PM3.0×4.0 screws
3
that secure the hard drive bracket to the hard drive.
d.
Lift the bracket
4
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.