HP Mini 311c-1070EF HP Pavilion dm1 HP Mini 311 Compaq Mini 311 - Maintenance - Page 79
Remove the Phillips PM2.0×7.0 screw, from the base enclosure.
View all HP Mini 311c-1070EF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Removal and replacement procedures Remove the system board: 1. Remove the Phillips PM2.0×7.0 screw 1 that secures the power connector to the base enclosure. 2. Release the power connector 2 from the base enclosure. 3. Remove the Phillips PM2.0×4.0 screw that secures the system board to the base enclosure. Maintenance and Service Guide 4-39
Removal and replacement procedures
Maintenance and Service Guide
4–39
Remove the system board:
1. Remove the Phillips PM2.0×7.0 screw
1
that secures the power connector to the base enclosure.
2. Release the power connector
2
from the base enclosure.
3. Remove the Phillips PM2.0×4.0 screw that secures the system board to the base enclosure.