HP Mini CQ10-688NR HP Mini 110 and Compaq Mini CQ10 - Maintenance and Service - Page 53
Hard drive, Lift the shield
View all HP Mini CQ10-688NR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Hard drive Description Hard drive only (does not include bracket, cover, or screws): 500-GB, 7200-rpm, 7.0-mm 320-GB, 7200-rpm, 7.0-mm 320-GB, 5400-rpm, 7.0-mm 250-GB, 7200-rpm, 7.0-mm 250-GB, 5400-rpm, 7.0-mm 160-GB, 7200-rpm, 7.0-mm Hard Drive Hardware Kit (includes bracket, cover, and screws) Hard Drive Cable Kit (includes hard drive connector cable) Spare part number 634925-001 649906-001 and 648925-001 648924-001 649902-001 and 648911-001 648910-001 649901-001 656272-001 628532-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 40). b. Service access cover (see Service access cover on page 43). Remove the hard drive: 1. Lift the shield (1) that covers the hard drive connector on the system board. 2. Disconnect the hard drive connector cable (2) from the system board. 3. Remove the three Phillips 2.0×4.0 screws (3) that secure the hard drive to the computer. 4. Lift the shield (4) that covers the hard drive to allow removal of the drive. Component replacement procedures 45