HP Model 715/100 hp 9000 series 700 model 715 workstations service handbook (a - Page 51
console, graphics_2
View all HP Model 715/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
The workstation is now searching for devices that may hold file systems from which it can boot HP-UX. As they are found, they appear in a list similar to the following example: Device Selection Device Path Device Type P0 scsi.6.0 QUANTUM LPS525s P1 scsi.5.0 QUANTUM LPS525s P2 scsi.2.0 TOSHIBA CD-ROM DRIVE:XM 11. The following list of actions appears: b) Boot from specified device s) Search for bootable devices a) Enter boot administration mode x) Exit and continue boot sequence ?) Help Select from menu: Press a Return The following prompt appears: BOOT_ADMIN> 12. Set the default console to the CRX graphics option by entering the following command line: BOOT_ADMIN> path console graphics_2 Return 13. Enter the following command: BOOT_ADMIN> exit Return 14. Power off the workstation and the monitor. 15. Connect the color monitor to the CRX graphics connector as shown in Chapter 1 of this manual. 16. Power on the monitor and the workstation. 3-20 Configuration