HP Mp3130 HP L1619a smart attachment module - (English) User Guide - Page 23
Showing Presentations, Ad Hoc, Infrastructure, Wireless Network Connection, Properties, TCP/IP
UPC - 829160021447
View all HP Mp3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Presenting from a Networked Computer 6. For an Ad Hoc connection, set the following properties: ■ Set the Authentication Mode to Ad Hoc. ■ Match the Desired SSID and WEP Encryption to the settings on the projector. ■ If a channel setting is available, set the channel to Auto. For an Infrastructure connection, set the following properties: ■ Set the Authentication Mode to Infrastructure. ■ Match the Desired SSID and WEP Encryption to the access point settings as specified by the network administrator. ■ If a channel setting is available, set the channel to Auto. 7. Click OK. 8. Right-click Wireless Network Connection again, and click Properties. 9. Double-click TCP/IP. For each type of connection, use the following values: ■ For an Ad Hoc connection, set the following properties: ❏ Select Obtain an auto IP address. ❏ Select Obtain DNS server address automatically. ■ For an Infrastructure connection, check with your system administrator to obtain the correct settings. Showing Presentations This section describes how to show presentations on a computer. ■ "To start a presentation" on page 24 ■ "To stop showing your presentation" on page 25 ■ "To include other presenters" on page 26 ■ "To disconnect and free the projector" on page 27 User's Guide 23