HP NM204UA HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 78
Four Phillips PM2.5×7.0 screws., Turn the display assembly upside down
UPC - 836367004463
View all HP NM204UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
4. Remove the display assembly (2). NOTE: Steps 5 through 27 provide display assembly internal component removal information for computers equipped with AntiGlare display assemblies. See steps 28 through 38 for display assembly internal component removal information for computers equipped with BrightView display assemblies. NOTE: See Webcam/microphone moduleon page 49 for webcam/microphone module replacement instructions for computers equipped with BrightView display assemblies. 5. If it is necessary to replace the display enclosure or any of the display assembly internal components, remove the following screw covers and screws: (1) Two plastic screw covers on the display bezel bottom edge. The display plastic screw covers are included in the Display Rubber Kit, spare part number 513479-001. (2) Four Phillips PM2.5×7.0 screws. 6. Turn the display assembly upside down, with the bottom edge toward you. 7. Disconnect the display assembly from the display enclosure by prying them apart from one another along the bottom edge (1). 8. Lift the display enclosure (2) as far as the display logo cable allows. 70 Chapter 4 Removal and replacement procedures