HP NM204UA HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide - Page 93
USB board, then unplugging the AC Adapter from the computer.
UPC - 836367004463
View all HP NM204UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Remove the audio/infrared board: 1. Disconnect the audio/infrared board cable (1) from the LIF connector on the system board. 2. Remove the Phillips PM2.5x7.0 screw (2) that secures the audio/infrared board to the base enclosure. 3. Release the clip (3) built into the base enclosure that secures the audio/infrared board. 4. Lift the audio/infrared board (4) straight up to remove it from the base enclosure. Reverse this procedure to install the audio/infrared board. USB board Description USB board (includes cable) Spare part number 516497-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the following components: a. Hard drive (see Hard drive on page 57). b. Optical drive (see Optical drive on page 51). c. Switch cover and keyboard (see Switch cover and keyboard on page 63). Component replacement procedures 85