HP Nc4010 HP Compaq nx5000 Notebook PC - Maintenance and Service Guide - Page 146
on the processor should be, aligned in the lower right corner when you install
View all HP Nc4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Removal and Replacement Procedures 2. Use a flat-bladed screwdriver to turn the processor lock screw 1 one-quarter turn counterclockwise to release the processor from the socket. 3. Lift the processor 2 straight up to remove it. ✎ Note that the gold triangle 3 on the processor should be aligned in the lower right corner when you install the processor. Removing the Processor Reverse the above procedure to install the processor. 5-38 Maintenance and Service Guide
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
2. Use a flat-bladed screwdriver to turn the processor lock
screw
1
one-quarter turn counterclockwise to release the
processor from the socket.
3. Lift the processor
2
straight up to remove it.
✎
Note that the gold triangle
3
on the processor should be
aligned in the lower right corner when you install the
processor.
Removing the Processor
Reverse the above procedure to install the processor.