HP Nc6220 HP Compaq nc6220 and nc6230 Notebook PC - Maintenance and Service Gu - Page 131
on the processor should be aligned in the, rear right corner when you install the processor.
View all HP Nc6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Removal and Replacement Procedures 5. Use a flat-blade screwdriver to turn the processor locking screw 1 one-quarter turn counterclockwise until you hear a click. 6. Lift the processor 2 straight up and remove it. ✎ The gold triangle 3 on the processor should be aligned in the rear right corner when you install the processor. Removing the Processor Reverse the above procedure to install the processor. Maintenance and Service Guide 6-29
Removal and Replacement Procedures
Maintenance and Service Guide
6–29
5. Use a flat-blade screwdriver to turn the processor locking
screw
1
one-quarter turn counterclockwise until you hear
a click.
6. Lift the processor
2
straight up and remove it.
✎
The gold triangle
3
on the processor should be aligned in the
rear right corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.