HP Neoware c50 NeoLinux 4.0 Thin Client User Manual - Page 60
USA FCC, Europe ETSI, Japan
View all HP Neoware c50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Network Configuration Operating Mode Default: Managed (with access point or with roaming) This should not be changed from the default setting, which allows multiple connections. Protocol Default: Auto This specifies the access point transmission speed and frequency range. Depending on the access point, selecting Auto will cause it to automatically detect the type of device and adjust the transmission and frequency range accordingly. Channel Default: automatic This enables you to specify the radio frequency which should be used by the access point and the wireless adapter. The default automatic setting usually works by automatically selecting the best channel to use. However, you can use a specific frequency by selecting one of the channels 1 through 14 as listed in the following table: 1 2,412 USA FCC, Europe ETSI, Japan 2 2,417 USA FCC, Europe ETSI, Japan 3 2,422 USA FCC, Europe ETSI, Japan 4 2,427 USA FCC, Europe ETSI, Japan 5 2,432 USA FCC, Europe ETSI, Japan 6 2,437 USA FCC, Europe ETSI, Japan 7 2,442 USA FCC, Europe ETSI, Japan 8 2,447 USA FCC, Europe ETSI, Japan 9 2,452 USA FCC, Europe ETSI, Japan 10 2,457 USA FCC, Europe ETSI, Japan 11 2,462 USA FCC, Europe ETSI, Japan 12 2,467 Europe ETSI, Japan 13 2,472 Europe ETSI, Japan 14 2,484 Japan 46 On-board WiFi