HP Neoware c50 Neoware Thin Clients running Microsoft® Windows - Page 217
APPENDIX B Aironet Wireless LAN Configuration, Enabling the USB Controller - bios
View all HP Neoware c50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Windows CE Thin Client User Manual APPENDIX B Aironet Wireless LAN Configuration This appendix decribes how to configure your thin client to use a Cisco Aironet 340 or 350 series PCI wireless Ethernet adapter. Enabling the USB Controller If you are using a Neoware thin client that was shipped prior to July 1st 2001, you will need to enable the USB controller in the BIOS in order to install and use the Cisco Aironet 340/350 internal wireless Ethernet card. Neoware thin clients shipped after July 1st 2001 already have the USB controller enabled. If your thin client was purchased after this date you do not need to follow the BIOS setting instructions. Note that once a wireless Ethernet card is installed in your thin client, the integrated 10/100 BaseT Ethernet (RJ-45) port is no longer functional. However, all thin client functions work through the wireless Ethernet connection, including Neoware Remote Manager and ezAnywhere shadowing functions. To set the USB Controller setting in the BIOS to Enabled: 1 Power off the Neoware thin client and disconnect all cables. 2 Open the casing of the thin client and insert the Wireless Ether- net Card into the PCI slot. 3 Replace the thin client casing and re-attach cables. 4 Power the thin client back on. 201