HP NetServer LH 3000 HP Netserver Mass Storage Upgrade Guide - Page 23
Step 8, Replace I/O Fans
View all HP NetServer LH 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 2 Installation Step 8: Replace I/O Fans The two I/O fan modules are identical. Replace them as follows: 1. Orient one I/O fan to the accessory board guide, as shown in Figure 2-10. Accessory Board Guide I/O Fan I/O Fan Figure 2-10. Insert Fan Assemblies (Shown for Pedestal Configuration) 2. Insert the fan module and press it firmly into the connector. 3. Repeat Steps 1 and 2 for the other I/O fan. 19
Chapter 2
Installation
19
Step 8:
Replace I/O Fans
The two I/O fan modules are identical. Replace them as follows:
1.
Orient one I/O fan to the accessory board guide, as shown in Figure 2-10.
I/O Fan
I/O Fan
Accessory Board Guide
Figure 2-10. Insert Fan Assemblies (Shown for Pedestal Configuration)
2.
Insert the fan module and press it firmly into the connector.
3.
Repeat Steps 1 and 2 for the other I/O fan.