HP NetServer LXr Pro8 HP Netserver LT6000r NetRAID-3Si Config Guide for Windo - Page 2

Power source System software: Navigator version Operating System Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS. Redundant power distribution units (PDU's) are strongly recommended. L.18.03 or later Microsoft Windows 2000 Advanced Server SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots: Default Boot Order M/S Certified Configuration HP NetServer LT 6000r 700 MHz 2 - 6 4.06.26 PW or later Any size 256 MB minimum. Must be HP. 2 standard, 3 required for redundancy See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, Embedded A, Embedded B, PCI64-6, PCI64-5, PCI64-4, PCI64-3, PCI64-2, PCI64-1 P2 - Client LAN P3 -Shared Storage (NetRAID-3Si) P4 - Local storage (NetRAID-1Si) Booted from embedded DAC Storage Local Controller Driver Cabinets (Physical drive location) Disk drives SCSI bus SCSI Ids May use embedded SCSI, embedded DAC, NetRAID-1Si, or NetRAID3Si. For embedded SCSI, use sym_hi.sys from Windows 2000 Adv. Server CD or later. For embedded DAC and NetRAID-xSi, use mraid35x.sys version 2.62 (Navigator L.18.04.5 or later). SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP (hot swap or fixed) Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Shared Controller Model No. of controllers Firmware BIOS Driver HP NetRAID-3Si Adapter D5955A 1 W.01.30 B.02.02 Mraid35x.sys 2.62 2