HP NetServer LXr Pro8 hp netserver lxr 8500 netraid-2m config guide for Micro - Page 2

lxr8500nt2m Server Configuration Parameter I/O slots Default boot order Local Storage Controller Driver Physical drive location Disk drives SCSI bus SCSI IDs System software Navigator CD-ROM Operating system Service pack Power distribution Layout Specification Added cards may be installed in any appropriate slot, considering the server default boot order provided below. IDE CD-ROM, FDD, PCI slot 1, PCI slot 2, embedded SCSI A, embedded SCSI B, PCI slot 3, PCI slot 4, PCI slot 5, PCI slot 6, PCI slot 7, PCI slot 8, PCI slot 9, PCI slot 10 Embedded SCSI, NetRAID-1Si, NetRAID-3Si, NetRAID-1M, or NetRAID-2M (in addition to shared storage NetRAID-2M controller) For embedded SCSI, sym_hi.sys, version 4.12, or later For NetRAID-1Si, NetRAID-3Si, NetRAID-1M, or NetRAID-2M, mraidnt.sys, version 4.05 (all drivers obtained from Navigator CD-ROM, version L.20.00, or later) Server internal drive bays, or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications, and any SCSI bus speed Any Version M.04.00, or later Microsoft Window NT® Server 4.0, Enterprise Edition SP5 or SP6a and Microsoft® hotfix Q316743. Please refer to the Microsoft® product support article at: http://support.microsoft.com/default.aspx?scid=KB;ENUS;q316743&ID=KB;EN-US;q316743 Redundant power distribution units (PDUs) are recommended. See power cabling diagram on page 6. Shared Storage Configuration Parameter Controller Model Number of controllers BIOS Firmware Driver NetRAID Assistant SCSI ID Channels RAID levels Specification HP NetRAID-2M Controller, Model P3411A, or P3475A One or two Disabled Version H.01.08 (firmware obtained from Navigator CD-ROM, version M.04.00, or later) Mraidnt.sys, version 4.05 (driver obtained from Navigator CD-ROM, version L.20.00, or later) Version B.01.04, or later (software obtained from Navigator CD-ROM, version L.20.00, or later) 6, 7 0, 1 1, 5, 10, 50 2/23/02 2