HP NetServer LXr Pro8 hp netserver lxr 8500 netraid-2m config guide for Micro - Page 5
/02, HP Netserver LXr 8500 Cluster using HP Rack Storage/12 Cabling Diagram
 |
View all HP NetServer LXr Pro8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
NetRAID-2M Controllers 0 1 NOTES: 2. Cables between the servers and shared storage cabinets can be any HP LVD SCSI cable up to 10 meters. See "Cables"in the Shared Storage Configuration table in the guide for a list of cables that can be used. 3. Another NetRAID Adapter may be installed in each server for local storage (and must connect only to local storage). 4. This diagram shows use of two NetRAID-2M controllers, the maximum supported for shared storage, installed in slots 7 and 8. One or two NetRAID-2M cards may be used, and from one to four RS/12s are supported. A maximum of eight logical drives are supported for the cluster. lxr8500nt2m HP Netserver LXr 8500 Cluster using HP Rack Storage/12 Cabling Diagram 2/23/02 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
lxr8500nt2m
2/23/02
5
NetRAID-2M Controllers
0
1
3.
Another NetRAID Adapter may be
installed in each server for local
storage (and must connect only to
local storage).
4. This diagram shows use of two
NetRAID-2M controllers, the maximum
supported for shared storage, installed
in slots 7 and 8. One or two NetRAID-2M
cards may be used, and from one to four
RS/12s are supported. A maximum of eight
logical drives are supported for the cluster.
NOTES:
2.
Cables between the servers and
shared storage cabinets can be any
HP LVD SCSI cable up to 10 meters.
See “Cables”in the Shared Storage
Configuration table in the guide for
a list of cables that can be used.
HP Netserver LXr 8500 Cluster using HP Rack Storage/12 Cabling Diagram