HP Nx7300 HP Compaq nx7300 and nx7400 Notebook PC Maintenance and Service Guid - Page 145
Three Torx T8M2.5×4.0 screws the defeatured model, uses four torx screws
UPC - 808736788502
View all HP Nx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Removal and Replacement Procedures 4. Remove the following: 1 Two HM5.0×10.0 screw locks on each side of the external monitor connector 2 Two Torx T8M2.5×6.0 screws (full-featured model only) 3 Three Torx T8M2.5×4.0 screws (the defeatured model uses four torx screws) Removing the System Board Screws and Screw Locks (full-featured model shown) 5-52 Maintenance and Service Guide
5–52
Maintenance and Service Guide
Removal and Replacement Procedures
4. Remove the following:
1
Two HM5.0×10.0 screw locks on each side of the external
monitor connector
2
Two Torx T8M2.5×6.0 screws (full-featured model only)
3
Three Torx T8M2.5×4.0 screws (the defeatured model
uses four torx screws)
Removing the System Board Screws and Screw Locks (full-featured
model shown)