HP Nx7300 HP Compaq nx7300 and nx7400 Notebook PC Maintenance and Service Guid - Page 153
Remove the two Torx8 T8M2.5×4.0 screws, side up and rotate it so that the right side clears the metal
UPC - 808736788502
View all HP Nx7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Removal and Replacement Procedures 3. Remove the two Torx8 T8M2.5×4.0 screws 1 that secure the USB/audio board to the base enclosure. 4. Lift the left side of the USB/audio board 2 to disengage it from the base enclosure. When lifting the board, lift the left side up and rotate it so that the right side clears the metal bracket attached to the base enclosure, and then lift the board out of the enclosure. Removing the USB/Audio Board Reverse the above procedure to install the USB/audio board. 5-60 Maintenance and Service Guide
5–60
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the two Torx8 T8M2.5×4.0 screws
1
that secure
the USB/audio board to the base enclosure.
4. Lift the left side of the USB/audio board
2
to disengage it
from the base enclosure. When lifting the board, lift the left
side up and rotate it so that the right side clears the metal
bracket attached to the base enclosure, and then lift the board
out of the enclosure.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.