HP OMEN 15-5100 Maintenance and Service Guide - Page 34
WLAN module
View all HP OMEN 15-5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
WLAN module Component Intel Wireless 7260BN 802.11 bgn 2x2 WiFi + BT 4.0 Combo Adapter Intel Dual Band Wireless-AC 7260(non v-Pro) 802.11 AC 2x2 WiFi + BT 4.0 Combo Adapter Spare part number 784640-006 784645-006 Before replacing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Disconnect the battery (see Disconnecting the battery on page 27). Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board. 3. Remove the WLAN module (3) by pulling the module away from the slot. NOTE: If the WLAN antenna cable is not connected to the terminal on the WLAN module, a protective sleeve should be installed on the antenna connector, as shown in the following illustration. 28 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts