HP OMEN 15-5100 Maintenance and Service Guide - Page 49

Display assembly

Get HP OMEN 15-5100 PDF manuals and user guides View all HP OMEN 15-5100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Reverse this procedure to install the light modules. Display assembly Before replacing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 25). 5. Remove the battery (see Battery on page 33). 6. Remove the power button board (see Power button board on page 38). 7. Disconnect the light boards (see Light modules on page 42). Remove the display assembly: 1. Position the computer on its side with the display slightly open. 2. Remove the six Phillips PM2.5×3.0 screws (1) that secure the display assembly to the computer. Display assembly 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Reverse this procedure to install the light modules.
Display assembly
Before replacing the display assembly, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
25
).
5.
Remove the battery (see
Battery
on page
33
).
6.
Remove the power button board (see
Power button board
on page
38
).
7.
Disconnect the light boards (see
Light modules
on page
42
).
Remove the display assembly:
1.
Position the computer on its side with the display slightly open.
2.
Remove the six Phillips PM2.5×3.0 screws
(1)
that secure the display assembly to the computer.
Display assembly
43