HP OMEN 15-ax200 OMEN by Laptop PC Maintenance and Service Guide - Page 54

WLAN module

Get HP OMEN 15-ax200 PDF manuals and user guides View all HP OMEN 15-ax200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

WLAN module Description WLAN module, Intel Dual Band Wireless-AC 7265 Spare part number 793840-005 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the WLAN module, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 32). 5. Disconnect the battery (see Battery on page 34). Remove the WLAN module: 1. Carefully disconnect 2 antenna cables (1). 2. Remove 1 Phillips 2.0x2.5 screw (2), and then remove the WLAN module (3). NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, protective sleeves should be installed on the antenna connectors, as shown in the following illustration. 44 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
WLAN module
Description
Spare part number
WLAN module, Intel Dual Band Wireless-AC 7265
793840-005
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the WLAN module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
32
).
5.
Disconnect the battery (see
Battery
on page
34
).
Remove the WLAN module:
1.
Carefully disconnect 2 antenna cables
(1)
.
2.
Remove 1 Phillips 2.0x2.5 screw
(2)
, and then remove the WLAN module
(3)
.
NOTE:
If the WLAN antenna cables are not connected to the terminals on the WLAN module, protective
sleeves should be installed on the antenna connectors, as shown in the following illustration.
44
Chapter 5
Removal and replacement procedures for authorized service provider parts