HP OMEN 17.3 Maintenance and Service Guide - Page 49
Fans, WLAN module, from the right fan.
View all HP OMEN 17.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Fans To remove the fans, use this procedure and illustration. Table 5-10 Fans description and part number Description Fans Spare part number M57139-001 Before removing the fans, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 29). 3. Disconnect the battery cable from the system board (see Battery on page 30). 4. Remove the heat sink (see Heat sink on page 38). Remove the fans: 1. Remove the two Phillips M2.0 × 3.0 screws (1) from the left fan and three Phillips M2.0 × 5.0 screws (1) from the right fan. 2. Disconnect the fan cables from the system board (2). 3. Remove the fans from the computer (3). Reverse this procedure to install the fans. WLAN module To remove the WLAN module, use this procedure and illustration. Table 5-11 WLAN module descriptions and part numbers Description Intel Wi-Fi 6 AX201-W + Bluetooth 5 (non-vPro) Spare part number L92724-006 Component replacement procedures 41