HP OMEN 17.3 Maintenance and Service Guide - Page 80
Solid-state drive specifications
View all HP OMEN 17.3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Table 9-2 Display specifications (continued) Metric U.S. Resolution 2560 × 1440 (QHD) 1920 × 1080 (FHD) Surface treatment Antiglare Brightness 300 nits Viewing angle UWVA Backlight WLED Display panel interface eDP 1.4 Solid-state drive specifications This section provides specifications for your solid-state drives. Table 9-3 Solid-state drive specifications 512 GB* 1 TB* Dimensions Height 1.0 mm 1.0 mm Length 50.8 mm 50.8 mm Width 28.9 mm 28.9 mm Weight < 10 g < 10 g Interface type PCIe PCIe Ready time, maximum (to not busy) < 1.0 ms 1.0 ms Access times, logical 0.1 ms 0.1 ms Transfer rate Sequential read up to 2150 MB/s up to 2150 MB/s Random read Up to 300,000 IOPs Up to 300,000 IOPs Sequential write up to 1550 MB/s up to 1550 MB/s Random write Up to 100,000 IOPs Up to 100,000 IOPs Total logical sectors 1,000,215,216 1,500,336,388 Operating temperature 0°C to 70°C (32°F to 158°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications might differ slightly. NOTE: Certain restrictions and exclusions apply. Contact support for details. 72 Chapter 9 Specifications