HP OMEN X Desktop PC 900-200i User Guide 1 - Page 30

4. Depending on your product, you can enable Hibernation for battery power or external power in any of the following ways: ● Power button-Under Power and sleep buttons and lid settings (wording may vary by product), select When I press the power button, and then select Hibernate. ● Power menu-Select Change Settings that are currently unavailable, and then, under Shutdown settings, select the Hibernate check box. The Power menu can be accessed by selecting the Start button. 5. Select Save changes. ▲ To initiate Hibernation, use the method that you enabled in step 3. ▲ To exit Hibernation, briefly press the power button. NOTE: If you have set a password to be required on exiting Hibernation, you must enter your Windows password before your work returns to the screen. Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and the computer. Shut down the computer when it will be unused and disconnected from external power for an extended period. The recommended procedure is to use the Windows Shut down command. NOTE: If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly pressing the power button. 1. Save your work and close all open programs. 2. Select the Start button, select the Power icon, and then select Shut down. If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● Press ctrl+alt+delete, select the Power icon, and then select Shut down. ● Press and hold the power button for at least 10 seconds. ● Disconnect the computer from external power. 20 Chapter 5 Managing power