HP OmniBook 6100 HP Omnibook 6100 Notebook - Reference Guide - Page 84
To connect a printer or other parallel device, To connect an external keyboard or mouse
![]() |
View all HP OmniBook 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Add-On Devices Connecting External Devices Note Before you connect any device, check its documentation to see if you need to make any settings or adjustments to the equipment before using it. This might include setting switches to configure the equipment so that it will operate properly with your computer and the software you plan to use. To connect a printer or other parallel device The computer's parallel port uses a standard 25-pin connector, most commonly used for connecting dot-matrix, ink-jet, and laser printers. You can also use it to connect a parallel Zip drive. • Connect the cable from the parallel printer or other parallel device to the computer's parallel port. To connect an external keyboard or mouse Note • Plug a USB mouse or keyboard into a USB port on the computer. -or- • Plug a PS/2 mouse or keyboard into a PS/2 port on the computer. The pointing stick and touch pad are normally disabled while an external PS/2 mouse is connected. To connect a PS/2 mouse and keyboard at the same time, use the HP F1469A Y adapter. To use hot keys from an external PS/2 keyboard, substitute left CTRL+left ALT for the computer Fn key. For example, to access Fn+F12, press left CTRL+left ALT+F12. Only Fn+F5, Fn+F7, and Fn+F12 are supported on an external PS/2 keyboard. A USB keyboard does not support Fn hot keys. 84 Reference Guide
![](/manual_guide/products/hewlettpackard-omnibook-6100-hp-omnibook-6100-notebook-reference-guide-1858b89/84.png)