HP P2000 HP StorageWorks P2000 G3 SAS MSA Controller Firmware Release Notes (5 - Page 10
Installing firmware using the Storage Management Utility (SMU), In Windows - firmware update tool
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing firmware using the Storage Management Utility (SMU) 1. Place the downloaded firmware package in a temporary directory. 2. If using a Smart Component, extract the contents of the Smart Component using one of the following methods: In Windows - Click Extract on the first screen of the Smart Component. In Linux - Enter ./CPxxxxxx.scexe --unpack= to extract the contents of the Smart Component to the folder. (For example,./CP01328.scexe --unpack=extract_here) 3. Locate the firmware file in the downloaded/extracted folder. The firmware filename is in the following format: TSxxxRxxx.bin 4. In single-domain environments, stop all I/O to vdisks before starting the firmware update. 5. Log in to the SMU and, in the Configuration View panel, right-click the system and select Tools > Update Firmware. A table displays currently installed firmware versions. 6. Click Browse and select the firmware file to install. 7. Click Install Controller-Module Firmware File. Allow approximately 10 minutes for the firmware to load and for the automatic restart to complete on the controller you are connected to. Wait for the progress messages to specify that the update has completed. In dual-controller systems with Partner Firmware Update enabled, allow an additional hour for the update to complete on the second controller. (Updating the second controller usually takes 20 minutes to complete, but may take as long as one hour.) 8. In the SMU display, verify that the proper firmware version is displayed for each module. 10