HP P2000 HP BladeSystem Deployment Guide for Solutions with 6Gb SAS Switches a - Page 55
P2000 drive enclosure port information, SAS In port, SAS port 1
View all HP P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
P2000 drive enclosure port information P2000 drive enclosures are supported for use in P2000 G3 SAS MSA Array environments. As shown in the following illustration: • SAS In port: One per I/O module. Labelled IN. Use this SAS expansion port to connect to a P2000 G3 SAS controller enclosure or to a P2000 drive enclosure that is between this drive enclosure and the controller enclosure. • SAS Out port: One per I/O module. Labelled OUT. Use this SAS expansion port to connect (cascade) an additional P2000 drive enclosure. NOTE: Mini-SAS to mini-SAS cables are required when connecting P2000 drive enclosures. D2700 disk enclosure port information As shown in the following illustration: • SAS port 1: Labelled P1. Use this SAS expansion port for the connection to the host (through the SAS Switch). • SAS port 2: Labelled P2. Use this SAS expansion port to connect (cascade) an additional disk enclosure. NOTE: Mini-SAS to mini-SAS cables are required when connecting D2700 drive enclosures. Device SAS port information 55