HP P3015d HP LaserJet P3010 Series - Software Technical Reference - Page 227
Remote firmware update by using FTP on a direct network connection, Windows operating systems - p3015 firmware
UPC - 884420455080
View all HP P3015d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Engineering Details NOTE: The following instructions can be used in Windows operating systems only. 1. Make note of the TCP/IP address on the EIO-Jetdirect page. The EIO-Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Determining the current level of firmware on page 206 2. Open a browser window. 3. In the address line of the browser, type ftp://, where is the TCP/ IP address of your product. For example, if the TCP/IP address is 192.168.0.90, type FTP:// 192.168.0.90 4. Locate the downloaded .RFU file for the product. 5. Drag and drop the .RFU file onto the PORT1 icon or onto any open space in the browser window. NOTE: If the PORT1 icon does not appear as a folder name, you might have to enable folder viewing for FTP sites in your Web browser. In Microsoft Internet Explorer, use the following procedure to enable the folder view. a. Select Tools, select Internet Options, and then select the Advanced tab. b. Select the Enable folder view for FTP sites. c. Click OK to save the setting. 6. The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or the computer. The messages described in the section Printer messages during the firmware update on page 207 appear on the control panel. NOTE: The product automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the READY message appears on the control panel. Do not turn off the product or interfere with the update until you see this message. 7. Print a configuration page and verify that the firmware revision number matches the revision of the current update. Remote firmware update by using FTP on a direct network connection If the HP LaserJet P3015 uses a direct network connection, use file transfer protocol (FTP) to update the firmware. Complete the following steps for your operating system. Windows operating systems 1. Make note of the TCP/IP address on the Embedded Jetdirect page. The HP Embedded Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Determining the current level of firmware on page 206 NOTE: Before connecting to the product, make sure that the product is not in Powersave mode. Also make sure that any error messages are cleared from the control-panel display. 2. Open a command window on the computer. 3. Type ftp . For example, if the TCP/IP address is 192.168.0.90, type ftp 192.168.0.90. 4. Press Enter on the keyboard. ENWW Remote firmware update 209