HP P4515x HP LaserJet P4010 and P4510 Series - User Guide - Page 199
Solve performance problems, Problem, Cause, Solution
UPC - 883585430420
View all HP P4515x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Solve performance problems Problem Pages print but are totally blank. Pages print very slowly. Pages did not print. Cause Solution The sealing tape might still be in the print Verify that the sealing tape has been cartridges. completely removed from the print cartridges. The document might contain blank pages. Check the document that you are printing to see if content appears on all of the pages. The product might be malfunctioning. To check the product, print a Configuration page. Heavier paper types can slow the print Print on a different type of paper. job. Complex pages can print slowly. Proper fusing may require a slower print speed to ensure the best print quality. The product might not be pulling paper Make sure paper is loaded in the tray correctly. correctly. The paper is jamming in the product. The USB cable might be defective or incorrectly connected. Other devices are running on your computer. If the problem persists, you might need to install the preventive maintenance kit. See Perform preventive maintenance on page 121. Clear the jam. See Jams on page 160. ● Disconnect the USB cable at both ends and reconnect it. ● Try printing a job that has printed in the past. ● Try using a different USB cable. The product might not share a USB port. If you have an external hard drive or network switchbox that is connected to the same port as the product, the other device might be interfering. To connect and use the product, you must disconnect the other device or you must use two USB ports on the computer. ENWW Solve performance problems 187