HP PSC 2350 Setup Guide - Page 3
Press the On button and confi
View all HP PSC 2350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
7 Connect the power cord and adapter 8 Press the On button and configure On a After you press the On button, the green light flashes, and then becomes solid. This may take up to a minute. b Wait for the print cartridge prompt before continuing. 9 Open access door Lift the access door until it stops. 10 Remove tape from both cartridges Pull the pink tab to remove the tape from both print cartridges. Do not touch the copper-colored contacts or retape the cartridges. 3 • HP all-in-one
3 •
HP all-in-one
8
9
10
7
Press the On button and confi
gure
Open access door
Remove tape from both cartridges
a
After you press the
On
button, the green light
fl
ashes, and then
becomes solid. This may take up to a minute.
b
Wait for the print cartridge prompt before continuing.
Lift the access door until it stops.
Pull the pink tab to remove the tape from
both
print
cartridges.
Connect the power cord and adapter
On
Do not touch the copper-colored
contacts or retape the cartridges.