HP Pavilion 10-n000 Maintenance and Service Guide - Page 35

CAUTION, until it separates from the display panel assembly.

Get HP Pavilion 10-n000 PDF manuals and user guides View all HP Pavilion 10-n000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Description Display cable Spare part number 832397-001 832764-001 814715-001 Before disassembling the tablet, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. NOTE: When replacing the back cover, be sure to remove the POGO connector and cable (see POGO (10-pin) docking connector cable on page 43) from the defective back cover and installed on the replacement back cover. Remove the back cover: CAUTION: Before turning the display panel assembly upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly. 1. Place the tablet on a flat surface, display panel side down, with the power button toward you. 2. Insert a thin, plastic tool between the back cover and the display panel assembly. The first insertion point should be just to the left of the microphone openings. 3. Lift the front edge of the back cover (1) until it separates from the display panel assembly. 4. Lift the left and right edges of the back cover (2) until it separates from the display panel assembly. 5. Release the zero insertion force (ZIF) connector (3) to which the POGO connector cable is attached, and then disconnect the POGO connector cable from the system board. Back cover 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Description
Spare part number
832397-001
Display cable
832764-001
814715-001
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
NOTE:
When replacing the back cover, be sure to remove the POGO connector and cable (see
POGO (10-pin)
docking connector cable
on page
43
) from the defective back cover and installed on the replacement back
cover.
Remove the back cover:
CAUTION:
Before turning the display panel assembly upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel assembly.
1.
Place the tablet on a flat surface, display panel side down, with the power button toward you.
2.
Insert a thin, plastic tool between the back cover and the display panel assembly. The first insertion
point should be just to the left of the microphone openings.
3.
Lift the front edge of the back cover
(1)
until it separates from the display panel assembly.
4.
Lift the left and right edges of the back cover
(2)
until it separates from the display panel assembly.
5.
Release the zero insertion force (ZIF) connector
(3)
to which the POGO connector cable is attached, and
then disconnect the POGO connector cable from the system board.
Back cover
27