HP Pavilion 11-h010ca HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 65
Display panel cable, Remove the display panel cable
View all HP Pavilion 11-h010ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4. Remove the system board (2). Reverse this procedure to install the system board. Display panel cable Description Display panel cable (includes adhesive support strips) Spare part number 740197-001 Before removing the display panel cable, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 30). 5. Disconnect the tablet battery cable from the system board (see Sensor board on page 31). 6. Remove the bezel (see Bezel on page 49). 7. Remove the system board (see System board on page 53). Remove the display panel cable: 1. Release the adhesive support strip (1) that secures the display panel cable to the display panel assembly. Tablet component replacement procedures 57