HP Pavilion 11-n100 Pavilion 11 x360 PC Maintenance and Service Guide - Page 49

Hard drive, Remove the Phillips PM2.0×7.0 screw

Get HP Pavilion 11-n100 PDF manuals and user guides View all HP Pavilion 11-n100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Hard drive NOTE: The Hard Drive Hardware Kit, spare part number 755740-001, includes the hard drive bracket, hard drive connector cable, and screws. The Solid-State Drive Hardware Kit, spare part number 783845-001 includes the connector cable, top and bottom brackets, PCBA, and screws. Description 750-GB, 5400-rpm, 7.0-mm 500-GB, 5400-rpm, 7.0-mm 500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm Spare part number 752099-001 778186-005 732000-005 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Disconnect the battery. Remove the hard drive: 1. Disconnect the hard drive connector cable (1) from the system board. 2. Remove the Phillips PM2.0×7.0 screw (2) that secures the hard drive and battery to the computer. 3. Remove the three Phillips PM2.0×3.0 screws (3) that secure the hard drive to the computer. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Hard drive
NOTE:
The Hard Drive Hardware Kit, spare part number 755740-001, includes the hard drive bracket, hard
drive connector cable, and screws.
The Solid-State Drive Hardware Kit, spare part number 783845-001 includes the connector cable, top and
bottom brackets, PCBA, and screws.
Description
Spare part number
750-GB, 5400-rpm, 7.0-mm
752099-001
500-GB, 5400-rpm, 7.0-mm
778186-005
500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm
732000-005
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
31
).
5.
Disconnect the battery.
Remove the hard drive:
1.
Disconnect the hard drive connector cable
(1)
from the system board.
2.
Remove the Phillips PM2.0×7.0 screw
(2)
that secures the hard drive and battery to the computer.
3.
Remove the three Phillips PM2.0×3.0 screws
(3)
that secure the hard drive to the computer.
Component replacement procedures
41