HP Pavilion 11-n100 Pavilion 11 x360 PC Maintenance and Service Guide - Page 66
Display assembly, To remove the display assembly
View all HP Pavilion 11-n100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Display assembly Description Display assembly for use in model numbers Pavilion 11-n000 x360 ~ Pavilion 11-n099 x360 with WWAN Display assembly for use in model numbers Pavilion 11-n000 x360 ~ Pavilion 11-n099 x360 without WWAN Display assembly for use in model numbers Pavilion 11-n100 x360 ~ Pavilion 11-n199 x360 with the following WLAN module: Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter Display assembly for use in model numbers Pavilion 11-n100 x360 ~ Pavilion 11-n199 x360 without the following WLAN module: Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter Spare part number 756108-001 755730-001 800298-001 802266-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 31). 5. Remove the battery (see Battery on page 54). To remove the display assembly: 1. Release the wireless antenna cables from the clips (1) built into the base enclosure. NOTE: The number of antenna cables may vary. 2. Disconnect the webcam cable (2) from the system board. 58 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts