HP Pavilion 15-cc000 Maintenance and Service Guide - Page 52

Memory module

Get HP Pavilion 15-cc000 PDF manuals and user guides View all HP Pavilion 15-cc000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 36). 5. Remove the bottom cover (see Bottom cover on page 37). 6. Remove the battery (see Battery on page 39). Remove the solid-state drive: 1. Remove the Phillips PM2.0×2.3 screw (1) that secures the drive to the system board. 2. Remove the drive (2) by pulling it away from the connector. NOTE: Solid-state drives are designed with notches to prevent incorrect insertion. Reverse this procedure to reassemble and install the solid-state drive. Memory module NOTE: Primary and expansion memory is installed in a side-by-side configuration in the bottom of the computer. If only one memory module is installed, it must be installed in the socket labeled 1. Description 8-MB, DDR4-2400, 1.2-V 4-MB, DDR4-2400, 1.2-V 2-MB, DDR4-2400, 1.2-V Spare part number 862398-855 862397-855 864271-855 Update BIOS before adding memory modules Before adding new memory, make sure you update the computer to the latest BIOS. CAUTION: Failure to update the computer to the latest BIOS prior to installing new memory may result in various system problems. To update BIOS: 44 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the optical drive (see
Optical drive
on page
36
).
5.
Remove the bottom cover (see
Bottom cover
on page
37
).
6.
Remove the battery (see
Battery
on page
39
).
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×2.3 screw
(1)
that secures the drive to the system board.
2.
Remove the drive
(2)
by pulling it away from the connector.
NOTE:
Solid-state drives are designed with notches to prevent incorrect insertion.
Reverse this procedure to reassemble and install the solid-state drive.
Memory module
NOTE:
Primary and expansion memory is installed in a side-by-side
configuration
in the bottom of
the computer. If only one memory module is installed, it must be installed in the socket labeled 1.
Description
Spare part number
8-MB, DDR4-2400, 1.2-V
862398-855
4-MB, DDR4-2400, 1.2-V
862397-855
2-MB, DDR4-2400, 1.2-V
864271-855
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION:
Failure to update the computer to the latest BIOS prior to installing new memory may result in
various system problems.
To update BIOS:
44
Chapter 5
Removal and replacement procedures