HP Pavilion 15-cc000 Maintenance and Service Guide - Page 63
Heat sink, Battery see
View all HP Pavilion 15-cc000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description For use only on computer models equipped with a graphics subsystem with discrete memory For use only on computer models equipped with a graphics subsystem with UMA memory Spare part number 926847-001 926846-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the optical drive (see Optical drive on page 36), and then remove the following components: a. Bottom cover (see Bottom cover on page 37) b. Battery (see Battery on page 39) c. Solid-state drive (see Solid-state drive on page 43) d. Fan (see Fan on page 49) e. System board (see System board on page 50) Remove the heat sink: NOTE: Steps 1 and 2 apply to computer models equipped with a graphics subsystem with discrete memory. See Steps 3 and 4 for heat sink removal information for computer models equipped with a graphics subsystem with UMA memory. 1. Remove the six Phillips PM2.0×2.9 screws (1) that secure the heat sink to the system board. Component replacement procedures 55