HP Pavilion 15-cc100 Maintenance and Service Guide - Page 67

Display assembly, speaker and the keyboard/top cover.

Get HP Pavilion 15-cc100 PDF manuals and user guides View all HP Pavilion 15-cc100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Display assembly NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the optical drive (see Optical drive on page 36). 5. Remove the bottom cover (see Bottom cover on page 37). 6. Remove the battery (see Battery on page 39). Remove the display assembly: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal. 2. Release the WLAN antenna cables from the retention clips (2) and routing channel built into the right speaker and the keyboard/top cover. 3. Release the ZIF connector (3) to which display panel cable is connected, and then disconnect the display panel cable from the system board. 4. Release the display panel from the retention clips (4) and routing channel built into the left speaker. 5. Remove the four Phillips PM2.5×6.7 screws (1) that secure the display assembly to the keyboard/ top cover. Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Display assembly
NOTE:
The display assembly is spared at the subcomponent level. For display assembly spare part
information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the optical drive (see
Optical drive
on page
36
).
5.
Remove the bottom cover (see
Bottom cover
on page
37
).
6.
Remove the battery (see
Battery
on page
39
).
Remove the display assembly:
1.
Disconnect the WLAN antenna cables
(1)
from the terminals on the WLAN module.
NOTE:
The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The
WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.
2.
Release the WLAN antenna cables from the retention clips
(2)
and routing channel built into the right
speaker and the keyboard/top cover.
3.
Release the ZIF connector
(3)
to which display panel cable is connected, and then disconnect the display
panel cable from the system board.
4.
Release the display panel from the retention clips
(4)
and routing channel built into the left speaker.
5.
Remove the four Phillips PM2.5×6.7 screws
(1)
that secure the display assembly to the keyboard/
top cover.
Component replacement procedures
59