HP Pavilion 15-cr0000 Maintenance and Service Guide - Page 40
WLAN module
View all HP Pavilion 15-cr0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
WLAN module Description Intel Dual Band Wireless-AC 7265 802.11 AC 2×2 WiFi + Bluetooth 4.2 Combo Adapter (non-vPro) Intel Dual Band Wireless-AC 3168 802.11AC 1×1 WiFi + Bluetooth 4.2 Combo Adapter (non-vPro) Realtek RTL8822BE 802.11 ac 2x2 WiFi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported) Realtek RTL8821CE 802.11 ac 1x1 WiFi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported) Spare part number 901229-855 863934-855 924813-855 L17365-005 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). 5. Remove the battery (see Battery on page 29). Remove the WLAN module: 1. Disconnect the antenna cable from the module (1). 2. Remove the Phillips M2.0×3.0 screw (2), and then pull the module out of the socket (3). Reverse this procedure to install the WLAN module. 32 Chapter 5 Removal and replacement procedures