HP Pavilion 15-n300 Maintenance and Service Guide - Page 91
Power connector cable
View all HP Pavilion 15-n300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Power connector cable Description Power connector cable (includes bracket) Spare part number 732067-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Optical drive (see Optical drive on page 45). b. Service door (see Service door on page 42). c. WLAN module (see WLAN module on page 44). d. Memory module (see Memory module on page 42). e. Keyboard (see Keyboard on page 51). f. Top cover (see Top cover on page 55). g. Hard drive (see Hard drive on page 59). h. System board (see System board on page 68). Remove the power connector board: NOTE: The power connector bracket was removed when removing the system board. 1. Turn the system board upside down, with the front toward you. 2. Release the power connector from the clip built into the system board. Component replacement procedures 81