HP Pavilion 15-p000 Maintenance and Service Guide - Page 129
Fan, Release the clips
View all HP Pavilion 15-p000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
5. Remove the optical drive. 6. Remove the top cover from the base enclosure (see Base enclosure on page 80). 7. Remove the WLAN module (see WLAN module on page 96). 8. Remove the subwoofer (see Subwoofer (select models only) on page 102). 9. Remove the system board (see System board on page 106). Remove the power connector cable: NOTE: The power connector cover was removed during the system board removal. 1. Release the metal clip to disconnect the power connector cable (1) from the system board. 2. Disengage the cable from the clips (2). 3. Release the clips (3), and then remove the power connector cable (4). Fan Reverse this procedure to install the power connector cable and bracket. Description For use with HP Pavilion 15 Notebook PC computer models For use with HP Pavilion 17 Notebook PC computer models Spare part number 762505-001 765788-001 Before removing the Fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. Component replacement procedures 119