HP Pavilion 15-p200 Pavilion 17 Notebook PC Pavilion 15 Notebook PC Maintenanc - Page 93
Power connector
View all HP Pavilion 15-p200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
2. Use a thin, non-conductive tool to remove the RTC battery (1) from the socket on the system board. Reverse this procedure to install the RTC battery on computer models. When installing the RTC battery, make sure the "+" sign faces up. Power connector Description For use with HP Pavilion 15 Notebook PC computer models For use with HP Pavilion 17 Notebook PC computer models Spare part number 762507-001 763699-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), 5. Remove the optical drive. 6. Remove the top cover from the base enclosure (see Base enclosure on page 46). 7. Remove the WLAN module (see WLAN module on page 62). 8. Remove the system board (see System board on page 70). Remove the power connector cable: NOTE: The power connector cover was removed during the system board removal. Component replacement procedures 83