HP Pavilion 17-g100 17-g099 AMD Models - Maintenance and Service Guide - Page 57
Display cable, Power connector cable
View all HP Pavilion 17-g100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
● Heat sink assembly (see Heat sink assembly on page 43) ● Fan (see Fan on page 42) To remove the system board: 1. Position the computer upright, and then disconnect the following cables from the system board: (1): Clickpad cable (2): Touchpad cable (3): Hard drive cable (4): Optical drive cable (5): Keyboard cable (6): Power connector cable (7): Display cable (8): Speaker cable (9): Power button board 2. Remove the four Phillips PM2.0×3.0 screws (1) that secure the system board to the computer. Component replacement procedures 49
●
Heat sink assembly (see
Heat sink assembly
on page
43
)
●
Fan (see
Fan
on page
42
)
To remove the system board:
1.
Position the computer upright, and then disconnect the following cables from the system board:
(1)
: Clickpad cable
(2)
: Touchpad cable
(3)
: Hard drive cable
(4)
: Optical drive cable
(5)
: Keyboard cable
(6)
: Power connector cable
(7)
: Display cable
(8)
: Speaker cable
(9)
: Power button board
2.
Remove the four Phillips PM2.0×3.0 screws
(1)
that secure the system board to the computer.
Component replacement procedures
49