HP Pavilion 17-g100 17-g099 AMD Models - Maintenance and Service Guide - Page 65
Display assembly, non-touch, unplugging the power cord from the AC outlet and then
View all HP Pavilion 17-g100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Display assembly, non-touch Component Display bezel (includes screw covers) Webcam/microphone module non-touch screen Raw display panel (16:9 Ultra Wide Aspect Ratio [43.9-cm 17.3-in]; includes screw covers) WLED Brightview HD+ non-touch screen WLED Antiglare FHD non-touch screen Display cable HD non-touch screen (includes screw covers) Display cable FHD non-touch screen (includes screw covers) Antennas non-touch screen (includes wireless antenna cables and transceivers; includes screw covers) Hinges HD non-touch screen (left and right, includes screw covers) Hinges FHD non-touch screen (left and right, includes screw covers) Display enclosure: Cobalt blue models Sunset red models Blizzard white models Natural silver models Violet purple models Peachy pink models Sparkling black models non-touch screen Pale gold models non-touch screen Spare part number 809291-001 806758-001 809313-001 809347-001 809292-001 809293-001 809271-001 809297-001 809298-001 809275-001 809274-001 809278-001 809273-001 809277-001 809276-001 810947-001 836856-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 27). 5. Remove the optical drive (see Optical drive on page 28). 6. Remove the bottom cover (see Bottom cover on page 32). To remove the display assembly: 1. Position the computer upside down with the display partially open. 2. Remove the four Phillips PM2.5×5.0 screws (1) that secure the display assembly to the computer. 3. Open the display to rotate the hinges upward to an angle (2). Component replacement procedures 57