HP Pavilion 32-inch Displays User Guide 2 - Page 17
Attaching the VESA mounting bracket, center of the display head 2.
View all HP Pavilion 32-inch Displays manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Attaching the VESA mounting bracket A VESA mounting bracket is included with the monitor for use when attaching the monitor panel to a wall, swing arm, or other mounting fixture. 1. Remove the monitor stand. Refer to Removing the monitor stand on page 10. 2. Remove the screw from the center of the rear of the display head. 3. Insert the tab at the bottom of the VESA bracket into the slot on the back of the display head until the bracket clicks in place (1), and then secure the top of the bracket with the screw that was installed in the center of the display head (2). 4. To attach the monitor to a swing arm or other mounting device, insert four mounting screws through the holes on the mounting device and into the screw holes on the VESA bracket that was installed on the rear of the monitor. Setting up the monitor 11