HP Pavilion 9700 HP Pavilion PC's - PCTEL V.90/K56Flex Series AT Command Guide - Page 22
S Registers
![]() |
View all HP Pavilion 9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
AT Command Guide S Registers REG. 0 1 2 3 4 5 6 7 8 9 Function Rings to auto-answer Set the number of rings required before the modem answers. 0 setting disables auto-answer. Range: 0 - 255 rings Default: 0 (auto-answer disabled) Ring counter Counts the number of incoming rings before the modem answers. Resets to 0 after five seconds of silence Range: 0 - 255 rings Default: 0 Escape character Define the character used for the three-character escape code sequence. 0 setting disables the escape code character. Range: 0 - 127 Default: 43 (+) Carriage return character Define the character for carriage return Range: 0 - 127 Default: 13 (carriage return) Line feed character Define the character for line feed Range: 0 - 127 Default: 10 (line feed) Backspace character Define the character for backspace Range: 0 - 127 Default: 8 (backspace) Wait before dialing Set the length of time to pause after off hook before dial. Range: 2 - 255 seconds Default: 2 seconds Wait for carrier after dial Set the length of time that the modem waits for a carrier from the remote modem before hanging up. Range: 1 - 255 seconds Default: 65 seconds Pause time for dial delay Set the length of time to pause for the pause dial modifier ",". Range: 0 - 255 seconds Default: 2 seconds Carrier detect response time Define the length of time a signal is detected and qualified as a carrier. Range: 1 - 255 tenths of a second Default: 6 (0.6 second) 22 V90K56DOCATC11A
![](/manual_guide/products/hewlettpackard-pavilion-6700-hp-pavilion-pcs-pctel-v90k56flex-series-command-guide-e1240a0/22.png)