HP Pavilion HDX9110TX HP Pavilion HDX Entertainmet Series Notebook PC - Mainte - Page 76
Processor fan, power management/battery conservation configurations, battery fast charging
View all HP Pavilion HDX9110TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
e. Rear cover (see Rear cover on page 53) f. Top cover (see Top cover on page 55) g. Subwoofer (see Subwoofer on page 67) Remove the video connector board: 1. Disconnect the video connector board cable (1) from the system board. 2. Remove the Phillips PM2.5×4.0 screw (2) that secures the video connector board to the base enclosure. 3. Route the video connector board cable under the processor heat sink pipe (3). 4. Remove the video connector board (4) from the base enclosure. Reverse this procedure to install the video connector board. Processor fan Description Processor fan Spare part number 448162-001 NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the left and right sides and rear panel of the computer. The computer uses two electric fans for ventilation. The fans are controlled by a temperature sensor and are designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grills located on the computer rear panel. Before removing the processor fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Component replacement procedures 69