HP Pavilion HDX9110TX HP Pavilion HDX Entertainmet Series Notebook PC - Mainte - Page 79
Remove the two SM1.5×9.0 screws, Processor fan cable
View all HP Pavilion HDX9110TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3. Disconnect the following cable connectors from the system board: (1) Speaker cable (2) Microphone cable (3) Audio/infrared board cable (4) Subwoofer cable (5) Audio connector board cable 4. Disconnect the following cables from the system board: (1) Bluetooth module cable (2) Front USB board cable (3) Processor fan cable (4) Composite video connector board cable 5. Remove the two SM1.5×9.0 screws (1) on each side of the expansion port 3 connector. 6. Remove the four Phillips PM2.5×4.0 screws (2) that secure the system board to the base enclosure. 72 Chapter 4 Removal and replacement procedures
3
.
Disconnect the following cable connectors from the system board:
(1)
Speaker cable
(2)
Microphone cable
(3)
Audio/infrared board cable
(4)
Subwoofer cable
(5)
Audio connector board cable
4
.
Disconnect the following cables from the system board:
(1)
Bluetooth module cable
(2)
Front USB board cable
(3)
Processor fan cable
(4)
Composite video connector board cable
5
.
Remove the two SM1.5×9.0 screws
(1)
on each side of the expansion port 3 connector.
6
.
Remove the four Phillips PM2.5×4.0 screws
(2)
that secure the system board to the base enclosure.
72
Chapter
4
Removal and replacement procedures