HP Pavilion HDX9311TX HP Pavilion HDX Entertainmet Series Notebook PC - Mainte - Page 65
TouchPad on/off board, Remove the two silver Phillips PM2.0×4.0 screws
View all HP Pavilion HDX9311TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Before removing the fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. Remove the following components: a. Hard drive (see Hard drive on page 42) b. Optical drive (see Optical drive on page 49) c. Keyboard (see Keyboard on page 50) d. Hinge cover (see Hinge cover on page 52) e. Rear cover (see Rear cover on page 53) f. Top cover (see Top cover on page 55) Remove the fingerprint reader board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two silver Phillips PM2.0×4.0 screws (1) that secure the fingerprint reader board and bracket to the top cover. 3. Remove the fingerprint reader board bracket (2) and fingerprint reader board (3). Reverse this procedure to install the fingerprint reader board. TouchPad on/off board Description TouchPad on/off board (includes cable) 58 Chapter 4 Removal and replacement procedures Spare part number 448167-001